Roads are basically installed with two main raw materials such as asphalt and concrete. As a matter of fact, concrete roads are well-known for their durability and strength, as well as last longer than asphalt roads. However, that does not mean your concrete road can’t be damaged. Eventually, because of the extreme weather condition, continuous movement of vehicles every single day, concrete roads become weaken. The following are some of the few tips on how to protect concrete roads and improve its life expectancy with the help of a professional:
1. Carry Out Regular Maintenance
When your concrete road is newly installed, you should first check it once in a while for any cracks or crevices. Cracks can actually occur when the mixture of concrete is not correct. In addition to that, if the concrete roads aren’t allowed enough time to dry or cure, then cracks are expected to show on the surfaces. Once you come across cracks, even to the smallest of size, you should make sure that you have them fixed at the soonest possible time. If you do not repair it, there is a chance that these small cracks become wider and eventually can lead to serious untoward incidents.
2. Seal the Road
Sealing of the concrete road is one of the steps to avoid the road from further damage. When your driveway or road begins to show indications of a crack or any sort of damage, you must then consider sealing it as soon as possible. You may either contact the professional and experienced concrete driveway repair service providers such as platinumcrete to get the task handled for you or you may visit the nearest local hardware outlet and purchase the appropriate type of road sealant.
3. Remove Stains
The continuous movement of cars will stain concrete roads over time because of diesel, petrol or oil leaks. These oil stains must be removed immediately. Do not change vehicle’s oil on the concrete driveway as well. Once you do so, there’s a possibility of these oils to spill onto the concrete surface, thus, increasing the risks of accidents to occur. However, when you have no choice left other than replacing your vehicle’s oil on the concrete driveway or road, cover the road surface using a piece of equipment. Aside from that, you may also clean the stains with cleaning solutions like trisodium phosphate (TSP) or any TSP alternatives such as detergents or dish washing soap which are available in your local market.
4. Avoid Accumulation of Water
When the water stays on the concrete surface for a long period of time, there is a higher chance that the concrete road may be damaged. Once the ice melts, it can seep through the small cracks present on the road or driveway. When the temperature drops, on the other hand, the water expands and may cause the widening of the cracks. Furthermore, you can actually prevent this by building your concrete road which the water doesn’t accumulate on the surface of the concrete road.